With summer well and truly upon us, and temperatures warmer than ever before, all of your car’s peripheral systems need to be running smoothly.
Like the human body, a car engine must always maintain its operating temperature at certain levels under normal circumstances to avoid damage.
Of all the systems and circuits of an internal combustion engine, what Maximum ensuring that the temperature is maintained at the correct levels is the cooling system.
The condition of the engine cooling system becomes more important for the smooth running of the engine, especially now in the summer when there are the highest temperatures of the year, While heat waves also appear where thermometers for a long period of time show temperatures above 40°C.
As with other vital engine fluids, coolant has a certain lifespan because it loses its properties over time. theoretically, The life of antifreeze, or antifreeze as it is called, does not have a certain limit.
But in real conditions and regardless of their quality, The fluid should be changed at least every two years (5 maximum)This depends, of course, on the intensity and frequency of vehicle use, the number of kilometers it travels each year, and the environment in which you usually move.
The mistake drivers now have to make is not only in the summer but at any time of the year It is to use tap water to fill or change the water tank completely It is located in the cooling circuit of its engine.
Tap water will corrode an electrical circuit and also leave scale making it difficult to maintain the desired flow with the risk of also damaging the water pump. On the other hand, for a cost of between 10 and 12 euros, drivers can also get FTA antifreeze. To make up for this, electrical circuitry is already in place to give the motor the ability to more easily handle the higher temperatures that will be called upon to render its service.
If you change the antifreeze, it would also be a good idea to check the car’s radiator, Brushes that may be externally “filled” with dirt and insects, to improve the fluid’s heat dissipation. To remove dirt, use a soft brush or toothbrush, applying gentle pressure as you brush.
Read also
“Avid problem solver. Extreme social media junkie. Beer buff. Coffee guru. Internet geek. Travel ninja.”
More Stories
“Recycling – Changing the water heater”: the possibility of paying the financing to the institution once or partially
Libya: US General Meets Haftar Amid Tensions Between Governments
New tax exemption package and incentives for business and corporate mergers..